Shape cutting and milling on a CNC plotter

Seal cutting is done on the most modern technologies, which allows complex shapes without the need for any tools. We cut our seals by one or serially.
The end seals for flexo
The end seals for flexo

Advantages of milling on a CNC plotter

  • Ability to cut seals up to 1550 × 3050 mm
  • Precise and quality cut
  • Time saving while working on an order
  • Clean production, which does not devalue the material
  • Production of seals according to the provided sample
  • Production of seals according to the provided drawing
  • Serial production of many or individual pieces

Technical information of materials, which are used on a CNC plotter

  • Compact rubber with thickness below 40 mm
  • Microporous rubber with thickness below 50 mm
  • Minimal thickness of materials is 1 mm
  • Minimal radius of holes is between 3 and 15 mm, depending on the thickness of rubber and type of material
  • Milling tolerance +/1 1 mm depending on the thickness of rubber and type of material

Materials suitable for milling

  • Rubber with hardness below 90° Shore - SBR, NBR, EPDM, CR, FKM, NR...
  • Microporous rubber - SBR, EPDM, CR, PE, FKM
  • Asbestos-free boards - Temafast, Temasil, Temaplus, GAMBIT...
  • Boards PTFE, PE, PVC, PP, PA...
  • Boards made of polyurethane with hardness below 90° Shore
  • Sealing paper

Commonly made products

  • Flanged seals
  • Round seals
  • Rectangular and round pads
  • Sweepers
  • Seals with a sticker
  • 3D shapes made out of foam rubber
  • Atypical seals made according to provided drawings

Formats of technical documentation

  • Autocad (dxf, dwg)
  • Corel (cdr)
  • Adobe reader (pdf)
  • Printed drawing
  • A physical sample

                                                                                                     Contact us: